How to Install Windows XP/Vista/7/8 from USB Drive

-->

With this tutorial you should be able to make a bootable Usb flash Drive that will be used to format your computer instead of a disk with the use of WinToFlash. one of the main advantage of using flash drive to format your system is that is it faster than ordinary disk.
it can also become the source of income for most of us. You can generate income for yourself by creating this bootable flash drive for others at a price

Things needed for this tutorial:
-USB Flash disk/Flash drive/Pen drive/Thumb drive, etc
-A copy of Windows XP/Vista/7/8 setup files in a folder( you can get this by copying it from the disk)

-Computer

Download WinToFlash from  http://wintoflash.com/download/en/
and Extract the zip file, then on the click on WinToFlash.exe

Click on Accept button.

It  will transfer the Windows setup to flash drive and make it a bootable flash drive. It is recommended that users who have no experience of Windows setup to switch on Wizard mode windows setup transfer wizard with basic instructions.

Click the button to enter Wizard mode...

You will need to use the wizard mode instead of advanced mode, double click Next...

Specify the the location of  the windows setup files folder to copied from the Disk earlier locate the  folder of  the Windows files path click Select button

Locate the the USB Flash drive you are about to use, then click OK

Click on "I Accepted the terms of the license agreement" then  Continue...

 

after that a Warning! Formatting will erase ALL DATA on target disk. To format press OK, to quit press Cancel, Click OK...
 
You will told  to wait while WinToFlash transfer Windows setup to flash drive this may take to take lot of  time to complete in order  to  fasten it you need to Disable Your anti-Virus If any at that moment after sometime it will display Finished... click Next then Exit
your bootable USB Flash drive ready...

In order for you to you to boot your computer with usb Flash drive must change the first boot order to USB Flash drive from BIOS.

In case you experience any difficulties during this, please use the comment box.

Read more

Use USB Flash Drive as RAM for Your Computer without any Software

-->     This tutorial is to help readers understand how a USB drive can be added as additional RAM in a Windows 7 Computer. The steps here are easy and correct until date for Microsoft Windows 7. However, it is still suggested that these should be followed mindfully to avoid opposite troubles. This will finally save users from looking for Windows 7 support or on the other hand Microsoft merchandise support for help.

Materials Needed:

A computer with Window 7, it can be desktop or a laptop

A USB Flash Drive

Steps Involved:
Close all the windows that are actually running on your desktop. Insert the USB flash drive into the Computer’s Port. After that, an Auto play window will pop up on the screen.

Focus on the General tab and move your mouse to Speed up my system option and click on it.
Focus the prepared Boost tab under the Flash propel Properties window.

Now you will glimpse three choices viz. one says do not use this Device, second Dedicate this device to Ready increase, and the third Use this apparatus.

 If you choose the first choice, you will have the prepared Boost feature handicapped.

If you select the second choice, you can use the additional or maximum space available on the Flash Drive. If you conclude on the third choice, you can adjust the available space of the flash you desire by adjusting the slider. When done, Click Apply button and then OK to go out of the Properties window. 

 Your drive is now ready to work as RAM in your computer.

If you don't want to use Ready increase, then you can reformat the drive to use it as RAM. Insert the flash into the system, close any Auto play note that pop up and browse to My Computer. Click to open  the Removable device and delete all its content. Then, close the window and right click on the drive's icon and select Rename. Give a name of your alternative to easily identify it next time.
Exit all the windows. Go to My Computer again right click to choose Properties from the drop down choices.

focus on the Advanced tab and then click the Settings button under the heading presentation. Go to Advanced again and then bang on the Change button.

In the Virtual Memory window, choose the USB flash drive by selecting the title you gave in previous step and it will display its current space available and the accessible size. Under Custom dimensions, it will display the primary and maximum dimensions. Now subtract 5MB from the accessible dimensions and go in that number into both the cartons viz. primary and greatest. For demonstration, if you see 2000MB as the propel dimensions, then enter 1995MB (exactly 5MB less than the original dimensions) in both the cartons. Click on the OK button to go out the Virtual Memory window.
Click on the request button and then OK to go out Performance Options window. replicate the same method to go out the System Properties window. one time all the windows are closed, reboot your computer. Do not unplug the  flash drive while the system is rebooting as it can result to failure. After this your computer should be faster in access your computer documents and applications etc.

Note:
· You should be logged in as an administrator or at least have the admin privileges to perform these operations.
· The drive should have at least 2GB free space so as to make it perform well.
· If you cannot find the Auto play choice, Go to my computer and Right click on the Removable Device and select Autoplay.

Read more